Creosote is the flammable residue every wood fire leaves behind. Our CSIA-certified technicians remove all three stages, from flaky soot to hardened glaze, across Dallas and Fort Worth, and show you the before-and-after so you know the flue is clean.
We received your request and will call you back shortly, usually within the hour.
☎ Call Us Now: (214) 396-6640By submitting, I consent to receive texts from Advanced Local Cleaning LLC. Msg & data rates may apply. Text STOP to unsubscribe.
When you burn wood, the smoke carries unburned tar and gas up the flue. As it hits the cooler upper chimney, it condenses and sticks to the walls as a dark residue called creosote. Every fire adds another thin layer.
On its own that sounds harmless. The problem is that creosote is one of the most flammable things in your home. Once the buildup reaches about an eighth of an inch, the National Fire Protection Association considers it enough to fuel a chimney fire, and it needs to come out.
Removing it is the entire reason chimney maintenance exists. Clear the creosote and the fireplace draws better, smells better, and, most important, is far less likely to catch fire.
Not all buildup is equal. The stage decides how hard it is to remove, and whether a brush will do or the flue needs a chemical treatment.
{{ sg.desc }}
{{ sg.fix }}
You don't need to climb on the roof to spot a problem. If you notice any of these, book an inspection before your next fire.
{{ it.desc }}
Matched to the stage of buildup we find, and always tidy from start to finish.
{{ st.desc }}
Fire departments respond to tens of thousands of chimney fires in the U.S. every year, and most start in flues that were overdue for cleaning. A creosote fire can burn past 2,000 degrees, hot enough to crack a clay liner and reach the framing behind your walls. Many go unnoticed until the damage is done. Removing the fuel is the one thing that reliably prevents it.
{{ f.a }}
Free inspection, honest pricing and same-week service across Dallas and Fort Worth.